JLab Audio stands out as a top maker of wireless earbuds. Opting for JLab earbuds is a smart choice for those people who are on a tight budget. These earbuds fit perfectly in your ear canals, making them comfortable to use. However, like with any gadget, some folks find it a little difficult to figure out all the functions.
If you are new to using them, it is totally normal not to know a few basic things, like how to turn these earbuds off. So, in this guide, we will show you how to turn off JLab earbuds using various methods. We will also address problems regarding your Jlab earbuds not turning off.
How To Turn Off JLab Earbuds
Several folks often struggle with turning off JLab earbuds. There are various ways to shut down these earbuds. They are:
- Putting the earbuds in the case
- Forgetting the earbuds in Bluetooth settings
- Turning off Bluetooth
- Pushing and holding each earbud
- Resetting the JLab earbuds
Here, we will explain each method in detail. Choose the one you like best and give it a try.
-
Put The Earbuds In The Case
The case does more than just charge your earbuds. It turns them on or off, protects them from outside impacts, and more. To shut them down using the case, simply put the earbuds inside it. After some time, you will see that they’re no longer turned on or linked to your device. However, if your case is not charged or is dirty, then it will not work.
Your JLab earbuds will not shut off in that case. It is a good idea to keep your case clean and regularly charge it. Keep your earbuds and the case where you can find them easily. Also, don’t lose them by keeping them in a cluttered or busy place with other stuff that may appear as a problem.
-
Forget The Earbuds In Bluetooth Settings
When you put the JLab earbuds in the charging case, they should turn off automatically. If that doesn’t happen, you can disconnect the earbuds from your device and eventually turn them off. To do that, firstly, visit your phone’s Bluetooth settings and find JLab earbuds.
Now, click on “Forget” to disconnect your phone from the buds. Your earbuds will shut down after three minutes.
-
Turn Off Bluetooth
It’s possible that your earbuds might be connected to a defective device, and it’s not necessarily an issue with the earbuds themselves. In this case, the device could be causing a glitch or some kind of problem that prevents the earbuds from turning off. Many people face this situation when they download apps without completely understanding or knowing about them.
Sometimes, your earbuds might not turn off because they get stuck in a defective app, refusing to respond to the general commands. This can be frustrating, especially if you’re not familiar with your earbuds or the app.
That’s why it’s important to pay attention to the guidelines that are given to you when you buy the earbuds. To disconnect the earbuds, head to your device’s Settings and shut down the Bluetooth option. This action should disconnect the earbuds, allowing them to shut down after a couple of minutes.
-
Push And Hold Each Earbud
It is the easiest method of all. Simply push and hold down the flat part of each earbud for around five seconds. You will listen to a voice saying “Goodbye,” and that means the earbuds are off. Remember that you will have to do this for each earbud separately.
-
Reset The JLab Earbuds
Many folks hesitate to reset their gadgets because they fear something might go wrong. However, devices are designed to handle resets when issues come up. While it isn’t the ideal choice, it does aid in solving any annoying issues. If your Jlab earbuds don’t turn off, consider resetting the buds to fix them.
Firstly, you need to disconnect them from your device’s Bluetooth function. Then, put both earbuds in the charging case. This action will turn them off. Give one earbud a quick tap, then the other, and do this seven times while they’re in the case. Now, you will see the buds flashing blue color three times. Next, take them out of the charging case.
You will see one of the earbuds flashing blue and white colors while the other one flashing a solid white color. After that, your buds will be reset and prepared to link with your device again. If this process does not work the first time, try it 2 or 3 times. If the issue persists, reach out to the manufacturer.
Why Your JLab Earbuds Won’t Turn Off: Possible Reasons And Solutions
Here are some reasons why your JLab Earbuds will not turn off and possible solutions.
Exposed To Extreme Temperatures
Dealing with technology can be a bit tricky because it reacts to the environment, and temperature plays a big role in how things function. It can be frustrating when some people don’t realize that the environment affects technology.
It’s important to remind them that technology is sensitive to its surrounding environment. Your earbuds and their case can stop functioning properly if they face extreme temperatures too much or too often. So, it’s crucial to avoid exposing them to extreme heat or cold regularly.
Solution
To make sure your earbuds and charging case stay in good shape, keep them in a cool, dry spot. This will prevent them from coming into unnecessary contact with moisture or too much heat.
Faulty Or Dirty Case
Your charging case can be faulty if it’s old, has a factory defect, or was badly handled. Also, many devices will only work properly if they are free of blockages and kept clean.
It’s a good idea to keep your charging case and buds in a clean place that is free from anything that could sneak into the charging case and cause trouble. Any food or debris that ends up inside the charging case can cause a lot of damage.
Solution
For the best fix, either return your earbuds and case if they are still under warranty or buy a new one. Also, depending on the place you keep your charging case, ensure there is nothing else in that compartment or pocket. Clean the compartment or pocket before putting your charging case inside. Keeping things clean is a smart move when you deal with technology.
Outdated Firmware
Many folks seem not to check their firmware often, maybe because they don’t have enough knowledge of it or for some other reason. Like many tech products, your earbuds need regular updates to make sure they are working their best. If your firmware has not been updated, your earbuds might not work properly.
Solution
Go to your firmware Settings and check if there are any updates available to install. If there are, go ahead and install them. This way, your earbuds will be updated and working properly. You can update your firmware through the JLab application.
Faulty Or Dead Battery
Exposing your earbuds and charging case to the elements without protecting them from the cold or heat can lead to serious issues. Moisture is another concern, as it can seep into your buds, causing extensive damage to the battery.
If this happens, generally, your earbuds might not turn off and won’t function properly. Also, if your case’s battery is dead, then it won’t be able to turn off your earbuds.
Solution
You can order replacement batteries. However, in this situation, it is better to consider getting a new pair of earbuds.
Your Case Isn’t Charged
Normally, the earbuds turn off when you place them back in the charging case. However, if the case is not charged, your earbuds will not turn off.
Solution
It’s one of the simplest solutions for your JLab Earbuds not turning off. Simply charge the case, and the earbuds will work properly.
Conclusion
When you first buy your JLab earbuds, it is a good move to learn how to turn off JLab earbuds. It can save you from problems in the long run. There are a lot of online reviewers who have used these earbuds can help you in such situations. However, this article will help you more than them regarding this topic.
Shutting down your JLab earbuds is very easy. You can easily turn these earbuds off by applying any one of the techniques discussed in this article. Still, if you have any more questions, feel free to drop them in the comments, and we’ll get back to you as soon as possible.
Frequently Asked Questions (FAQ’s)
How do I turn on JLab wireless earbuds?
Firstly, remove the wireless earbuds from the case and take off the stickers. Then, push and hold both earbuds’ touch sensors for three seconds or more. This will turn on the earbuds. Now, you will see that one earbud shows solid white, and the other one flashes white and blue. It indicates that the earbuds are prepared to pair with your chosen device.
How do I control my JLab earbuds?
You can control your JLab earbuds with its built-in touch controls. These touch controls make controlling your favorite music very easy. For instance, you can press the right earbud’s volume up button to skip songs. To reverse songs, you need to push and hold the volume down button.
How do I turn on my JLab earbuds without the case?
If you want to turn on your JLab earbuds without the case, then begin by pressing and holding your right earbud button for around ten seconds. You will see a white and blue light appearing, which means the earbud has turned on and is ready to pair with your Bluetooth device. After the right earbud is connected, proceed to turn on your left earbud following the same process.
